00. Linseed oil paint color samples - a set of 33 shades

Delivery Options:

• Omniva Parcel Lockers: Convenient delivery to your selected Omniva locker – only 2.99 EUR.
• Courier Delivery: Direct delivery starting from 5.99 EUR (exact fee depends on order weight and delivery address).

FREE delivery on orders over 100 EUR!

Delivery Time:
Orders are typically delivered within 2-4 business days after payment is received. For orders placed on weekends or holidays, delivery will start on the next business day.

Receiving Your Order:
Please check the condition of the packaging upon delivery. If the package is damaged, you may refuse the item and notify us.

Returns and Exchanges:
You can return items within 14 days of receipt, provided they are unused and the packaging (paint can) remains unopened. Return shipping costs are covered by the buyer unless the item is damaged or incorrect.

Refunds:
Refunds are processed within 14 days after receiving and inspecting the returned item.

For more details on delivery and returns, please see our full policy here.

Weather Conditions and Environment

Painting should be done when the air temperature is at least +12°C, and the relative humidity is below 80%. Do not paint on wet surfaces, freshly sawn timber, or wood with a moisture content above 14%.

Allbäck paints can be applied even in direct sunlight.

Surface Preparation

Clean the wooden surface of dust and small particles with a brush. If the surface is dirty, wash it with linseed soap and allow it to dry completely.

❗ If the wood surface has previously been painted with synthetic paint, it must be completely stripped of the old paint layer.

For surfaces exposed to direct weather conditions (such as decking, garden furniture, fences, etc.), we recommend priming at least once with cold-pressed Allbäck linseed oil to provide additional moisture protection. To do this, heat the linseed oil by placing the container in a water bath and warming it to about +60°C. Once the priming coat has completely dried, the surface is ready for painting.

Knots in the wood should be treated with two coats of shellac to prevent resin leakage and ensure a uniform color tone. After the shellac has dried, sand the treated areas with fine sandpaper, and the surface is ready for painting.

Preparing the Paint for Use

Stir the paint thoroughly before use. If necessary, the paint can be thinned with boiled Allbäck linseed oil, adding up to 5% of the total volume.

❗ Allbäck linseed oil paints must not be thinned with turpentine or other solvents, as they may contain chemical additives.

For exterior use, we recommend adding the natural mineral zinc oxide (ZnO), available in our store. Add ZnO to the paint in proportions of around 10-20% (20% for light colors, 10% for dark colors) to provide additional UV protection. ZnO is a natural mineral widely used in both linseed oil paint production and in cosmetics (sunscreens), pharmaceuticals, and other products.

We also recommend adding ZnO for surfaces that will be subject to heavy use—such as floors, tabletops, or cabinets—to ensure an even more durable coating.

Painting

Take a brush, apply the paint to a small section of the surface. Then, carefully rub the paint in the direction of the wood grain, followed by a perpendicular application across the surface width. Finally, smooth out the paint along the grain. The paint coat should be applied thinly and evenly.

Regularly stir the paint throughout the painting process.

Repaint the surface once it is completely dry.

Linseed oil paint not only colors the surface but also naturally absorbs into the wood and polymerizes, forming a durable protective layer against moisture and mold. For complete protection, we recommend applying 3 coats. The second and final coats should be applied thinly, following the direction of the wood grain.

Drying Time

The drying time for the paint is approximately 24 hours at +20°C. Drying time depends on several factors, such as air humidity, temperature, and sun exposure, and may be significantly extended at lower temperatures or higher humidity. The drying time for the second and third coats may be longer. Always ensure that the paint is fully dry before applying the next coat.

Brushes for Painting with Linseed Oil Paints

We recommend using Allbäck brushes, available in our store, or stiff bristle brushes suitable for linseed oil paints.

Between painting sessions, the brush should be stored in a container of linseed oil, completely covering the bristles. Brushes can be stored this way indefinitely, even at temperatures below zero. Before use, wipe the brush with a cloth.

❗ Do not store brushes in turpentine or other solvents, as they may contain chemical additives.

After finishing the painting job, wash the brush in warm water with linseed soap or regular soap, and dry it with a cloth.

Storage

Store in a place out of reach of children, tightly closed in an upright position. Once opened, close the container tightly for future use. We recommend storing at room temperature, although it is also acceptable to store at temperatures below freezing. Protect from direct sunlight and do not store near food.

When storing an opened container for a long period, natural oxidation may cause the paint to thicken. Strain the paint before reuse.

Shelf Life

Allbäck linseed oil paints have no defined expiration date as long as they are kept in unopened containers.

Cleaning

If linseed oil paint gets on your hands or objects, we recommend cleaning with linseed soap, regular soap, or natural resin turpentine.

Have More Questions?

Feel free to write to us at info@ekokrasas.lv, and we will gladly assist you with advice and recommendations for the best solution!

Attention!

If you have used a cloth or sponge soaked in linseed oil or linseed oil paint during the painting process, it must be soaked in water or burned after use! Linseed oil undergoes a thermal reaction with fabric, which can lead to spontaneous combustion.