OLI-NATURA Yacht & Teaköl | Natural protection for wooden terraces and garden furniture

What is OLI-NATURA Yacht & Teak Oil?

OLI-NATURA Yacht & Teak Oil is a natural wood protection oil that consists of a blend of vegetable oils (linseed oil, castor oil, etc.) and natural pigments. It contains no biocides, fungicides, synthetic resins, or preservatives, unlike many products available on the market.

It is especially suitable for terraces, garden furniture, yacht and boat decks as well as other wooden surfaces that are exposed to intense moisture, UV radiation, and weather conditions. It penetrates deep into the wood without forming a "film," allowing the wood to breathe naturally and preventing cracking. Thanks to its DIN EN 71-3 certification, it is also safe for children and suitable for surfaces that children may come into contact with.

Why choose OLI-NATURA Yacht & Teak Oil?

• Natural formula – contains no biocides, fungicides, synthetic resins, or preservatives.
• Safe for children – complies with DIN EN 71-3 (toy safety standard), safe for wooden surfaces that children come into contact with.
• Deeply penetrates wood without clogging pores – allows the wood to "breathe," preventing cracking.
• Protection against moisture and UV radiation – protects against mold and blue stain formation.
• Does not peel or crack like synthetic coatings – long-lasting, natural effect.

🚫 No synthetic waxes, polyurethanes, or acrylic additives that could create a "film" effect or interfere with the wood’s natural moisture regulation.

Which types of wood is it suitable for?

• Pine, spruce, larch – the wood may have been previously impregnated.
• Hardwood – oak, ash, alder.
• Exotic woods – teak, mahogany, eucalyptus, etc.

How to apply it correctly?

1. Surface preparation:
   • The surface must be clean, dry, and free from grease.
   • We recommend cleaning the surface beforehand with linseed soap.
   • Required air temperature: +15°C to +28°C, relative humidity 40–65%.
2. Application of oil:
   • Apply a thin layer with a brush or felt roller.
   • After 20–30 minutes, wipe off excess oil with a dry cloth to avoid oil stains.
   • We recommend applying two coats. Apply the second coat after 12 hours and wipe off excess oil again after 20–30 minutes with a dry cloth.
3. Drying time:
   • Around 12 hours on average.
   • Fully cured: 2–5 days, depending on humidity and temperature.

Consumption

• 1L covers 15-20 m² (depending on the type of wood).
• The second coat usually requires about 40% less oil than the first coat.

Safety and storage

• ⚠ Oil-soaked cloths can self-ignite if not stored properly.
• ⚠ They must be soaked in water or burned after use.

📦 Storage

• Shelf life: at least 36 months (at 18°C).
• Store in the original, tightly sealed packaging in a dry place.
• Keep out of reach of children.

Surface cleaning and maintenance

• For daily cleaning, use warm water and avoid aggressive cleaning agents with a high pH level.
• As a cleaning and additional protection agent, we recommend using liquid linseed soap.
• After several years, we recommend refreshing the protective layer with the same oil.

Do you have any questions or concerns?

Feel free to write to info@ekokrasas.lv or call +371 286 862 84, and we will be happy to assist you with advice, consultations, and recommendations for the best solution!